Study guides · Intermediate

Derive response and turnaround from schedules

Compare arrival order, shortest jobs and time slices for one workload, distinguishing first response, fairness and switching overhead.

Ask Logeia about this articleTry the three questionsReview your answers

Updated

On this page
  1. Distinguish first response from completion
  2. Follow arrival order and nonpreemptive shortest jobs
  3. Share early execution opportunities with a quantum
  4. Calculate metrics from explicit traces
  5. Add switching costs and fairness requirements
  6. Classify where a real request is waiting
  7. Keep total work separate from its distribution
  8. Expose prediction assumptions for unknown job lengths
  9. Exercise: choose a policy for a stated objective
  10. Ask Logeia about this articleCheck your understanding

Distinguish first response from completion

Three jobs A, B and C arrive at times zero, one and two and require five, two and one CPU-time units. Use one CPU and omit I/O waits and switching costs in this model. Total work is eight under every schedule, but first execution and completion times differ. Define response time as first execution minus arrival, and turnaround as completion minus arrival.

A product's response-time metric may include networking, service queues and downstream calls, so keep this narrower CPU definition explicit. A small average also does not guarantee good treatment of every job. Consider long-job starvation, prompt service for short jobs and completion deadlines separately. A scheduling choice only makes sense relative to those objectives, rather than one undifferentiated claim that the system became faster.

Follow arrival order and nonpreemptive shortest jobs

FCFS runs A from zero to five, B from five to seven and C from seven to eight. Response times are zero, four and five; turnarounds are five, six and six. Short CPU demand does not prevent a job from waiting behind an earlier long job. A fully busy CPU can therefore coexist with poor initial response for short requests.

Nonpreemptive shortest-job-first still lets A finish. At time five it chooses waiting C before B, giving responses zero, three and five for A, C and B, with turnarounds five, four and seven. This differs from preempting the current job whenever a shorter one arrives. It also assumes knowledge of job lengths, an assumption a real scheduler or application classifier may only approximate.

Share early execution opportunities with a quantum

For round robin with quantum two, define arrivals through time two to enter before A is requeued. The trace is A at zero–two, B at two–four, C at four–five, A at five–seven and A at seven–eight. Responses become zero, one and two, while A completes later at eight. Sharing initial opportunities and finishing the first long job early are different objectives.

Specify how arrivals exactly on a quantum boundary are enqueued and how completed jobs leave the queue. Otherwise identical inputs can produce different valid traces. A's final consecutive slices occur because no other job remains runnable. This table is a deterministic teaching schedule, not measurement of actual context-switch behavior or a claim that an operating system must follow these precise implementation details.

PolicyA: response / turnaroundB: response / turnaroundC: response / turnaround
FCFS0 / 54 / 65 / 6
Nonpreemptive SJF0 / 55 / 73 / 4
RR, quantum 20 / 81 / 32 / 3

Calculate metrics from explicit traces

The code uses three fixed schedules and asserts that each job receives exactly its required CPU time. It extracts first start and final completion to compute response and turnaround from arrival times. Round-robin responses zero, one and two are checked explicitly. This is a trace-analysis model, not an experiment controlling the real operating-system scheduler.

Keep individual values even when reporting averages. FCFS average response is three and this round-robin example averages one; mean turnaround is seventeen thirds versus fourteen thirds. Those three jobs do not establish a universal ranking for every arrival stream. Preserve arrivals, demands, quantum, boundary convention and switching-cost assumption with the results. A metric's name only becomes useful when its start and end events are defined consistently.

python
from collections import deque
jobs={'A':(0,5),'B':(1,2),'C':(2,1)}
def report(trace):
    first={};last={}
    for start,end,name in trace:first.setdefault(name,start);last[name]=end
    return {name:{'response':first[name]-arrival,'turnaround':last[name]-arrival} for name,(arrival,work) in jobs.items()}
fcfs=[(0,5,'A'),(5,7,'B'),(7,8,'C')]
sjf=[(0,5,'A'),(5,6,'C'),(6,8,'B')]
rr=[(0,2,'A'),(2,4,'B'),(4,5,'C'),(5,7,'A'),(7,8,'A')]
for name,trace in [('FCFS',fcfs),('nonpreemptive SJF',sjf),('RR q2',rr)]:
    for key,(arrival,work) in jobs.items():assert sum(end-start for start,end,k in trace if k==key)==work
    print(name,report(trace))
assert [report(rr)[k]['response'] for k in jobs]==[0,1,2]
print('fixed schedules; zero switch cost; no real OS scheduler measurement')

Add switching costs and fairness requirements

Real switching can involve saving state and disturbing execution locality. A very short quantum may spend a larger fraction of time on scheduling overhead, while a very long one can delay a short job's first turn. Compare quantum length with switching cost rather than assuming finer sharing is always faster and fairer. Those costs were deliberately zero in the trace model.

Priority policies can also leave low-priority work waiting indefinitely without an additional service rule. Aging or allocation shares address different requirements. Deadline scheduling introduces further inputs such as deadlines and remaining work. The three basic policies here do not automatically solve real-time guarantees or priority inversion. Connect their limited objectives to the existing starvation and inversion readings rather than silently attributing those stronger properties to a short example.

Classify where a real request is waiting

A slow application may wait for CPU, a lock, I/O completion or a connection lease. A job with little CPU time but long elapsed time is not the same model input as a CPU-heavy job. Application thread-pool queues and database-pool queues also differ from the OS runnable queue. Identify which layer's ordering can actually be changed before combining all delays into one number.

Mark arrival, admission, execution start, external wait and completion with appropriate clock and unit conventions. If mapping model response time to a product event such as the first HTTP byte, explain the intervening layers. Unqualified wall-clock comparisons across processes can add their own ambiguity. Connecting definitions to observed events makes the model useful for choosing a change instead of merely attaching familiar metric names to unrelated timings.

Keep total work separate from its distribution

All three schedules require eight CPU units. With zero switching cost, their final completion time is eight, yet individual response and turnaround differ. Round robin did not reduce the arithmetic work in this example; it changed who received time when. The final completion of the entire batch and each caller's wait are different objectives.

Adding I/O introduces another state and can allow computation from one job to overlap another's waiting. The three scalar CPU demands then no longer describe enough information to construct a trace. Record runnable, running and externally waiting states and the transitions between them. A continuously occupied CPU in the old model does not establish the same behavior after I/O is introduced. Change the model before changing the interpretation, rather than adding an unmodeled waiting explanation only after seeing a desirable result.

The model knows each CPU demand in advance. A real scheduler generally needs estimates or a policy that does not assume that knowledge.

Expose prediction assumptions for unknown job lengths

The shortest-job example knows each demand in advance. A real implementation may predict from history or request class, and a supposedly short job can then occupy a slot much longer than expected. Do not compare perfect-information schedules with prediction-based implementations as if they shared the same input. Preserve predictions and actual demands to examine how misclassification affects waiting.

A continuing stream of short arrivals may also improve a mean while a long job waits excessively. Decide whether maximum wait or minimum service guarantees are required. The three-job finite trace completes everything and is not an empirical starvation experiment under infinite arrivals. Treat a fixed example, an estimator and long-run fairness as separate questions. Their tests and assumptions differ, and none should inherit a stronger conclusion merely because all are called scheduling.

Exercise: choose a policy for a stated objective

For these three jobs, distinguish quickly sharing first execution opportunities from completing A as early as possible. Under the zero-switch-cost model, round robin serves the first objective, while a policy leaving A uninterrupted is a candidate for the second. Show each job's response and completion rather than claiming that one mean proves universal user satisfaction.

Now assign switching cost0.5. Define where switches occur, including consecutive slices of the same job, and rebuild the trace. Added time can change how arrivals relate to scheduling boundaries. Do not simply add one arbitrary constant to every old average. Update assumptions, schedule and metric calculation together. A policy label is less informative than a concrete account of which request waits and why under the revised conditions.

Reading and practice are recorded separately in this browser, for each language.

Learn this in order

Understand the systems behind the web · STEP 5

Choose a learning path